Zlepšite tlač s magnetickou podložkou pre 3D tlačiarne, jednoduchá inštalácia a odstránenie tlače. Odolná vysokým teplotám a bez nutnosti adhezív. viac
Podložka má ľahko ohnutý roh/rohy. Pre 99% tlače nebude mať poškodenie vplyv.
The magnetic mat is a practical and very functional upgrade to your 3D printer. The product consists of two parts. The first part with a self-adhesive layer is firmly stuck to the printer plate or to the glass, the second part consists of a backing that can be removed and reused after printing.
No additional adhesive is required for printing with this pad, however, for higher success, it is advisable to use 3DLAC.
The board is resistant to temperatures up to 130 °C for a long time, and 180 °C for a short time. Above 130 °C, the pad may partially lose its magnetic effects for a short time.
Size: 235mm x 235mm
Suitable for example for printers:
Anet A2/A6/A8
Wanhao i3
Creality CR-20
Creality Ender 3
Creality Ender 4
Creality Ender 5
Geeetech A10/A20M
Tevo Tarantula Pro
FELIX Printers Pro 3
Two Trees Sapphire Pro S1
Two Trees Bluer
Alex D
hviezda 1hviezda 2hviezda 3hviezda 4hviezda 5Počet hviezdičiek je 4 z 5
KladyBezproblemova instalace
Povrch dle popisu
KladyBezproblemova instalace
Povrch dle popisu
ZáporyV popisu nepatrne chybi, ze se to nema odmastovat acetonem.
A az/jestli ta poznamka tam bude tak VELKYM PISMEM :)
ZáporyV popisu nepatrne chybi, ze se to nema odmastovat acetonem.
A az/jestli ta poznamka tam bude tak VELKYM PISMEM :)
